3.7~5.2m³/min Two Stage Screw Air Compressor 30KW Air Cooling
⊙ Type air compressor pause
| Specifacation | Cooling Style | Air Capacity
(m³/min) | Discharge Pressure
(bar) | Motor Power
(kw) | Speed
(r/min) | Voltage(V)
Frequency(Hz) | Cooling Air Capacity
(m3/min) | Joint pipe Size
(inch) | Total Weight
(kg) | Dimension(L*W*H)
(mm) |
| SRC-7.5SA | Air cooling | 0.85 | 7 | 5.5 | 2980 | 380V50Hz | 80 | 1/2″ | 230 | 850*735*990 |
| 0.8 | 8 |
| 0.6 | 10 |
| 0.4 | 13 |
| SRC-10SA | Air cooling | 1.1 | 7 | 7.5 | 2980 | 380V50Hz | 80 | 1/2″ | 410 | 850*735*990 |
| 1 | 8 |
| 0.8 | 10 |
| 0.6 | 13 |
| SRC-15SA | Air cooling | 1.7 | 7 | 11 | 2980 | 380V50Hz | 80 | 1/2″ | 475 | 1100*750*1150 |
| 1.6 | 8 |
| 1.4 | 10 |
| 1.2 | 13 |
| SRC-20SA | Air cooling | 2.4 | 7 | 15 | 2980 | 380V50Hz | 100 | 1″ | 560 | 1350*850*1150 |
| 2.2 | 8 |
| 2.1 | 10 |
| 1.7 | 13 |
| SRC-25SA | Air cooling | 3.1 | 7 | 18.5 | 2980 | 380V50Hz | 145 | 1″ | 580 | 1350*850*1150 |
| 2.9 | 8 |
| 2.7 | 10 |
| 2.2 | 13 |
| SRC-30SA | Air cooling | 3.8 | 7 | 22 | 2980 | 380V50Hz | 145 | 1″ | 640 | 1350*850*1150 |
| 3.5 | 8 |
| 3.2 | 10 |
| 2.7 | 13 |
| SRC-40SA | Air cooling | 5.2 | 7 | 30 | 2980 | 380V50Hz | 255 | 1″ | 900 | 1350*850*1150 |
| 5 | 8 |
| 4.3 | 10 |
| 3.7 | 13 |
| SRC-50SA | Air cooling | 6.4 | 7 | 37 | 2980 | 380V50Hz | 255 | 1½″ | 980 | 1550*950*1450 |
| 5.9 | 8 |
| 5.5 | 10 |
| 4.8 | 13 |
| SRC-60SA | Air cooling | 8 | 7 | 45 | 2980 | 380V50Hz | 255 | 1½″ | 1050 | 1550*950*1450 |
| 7.7 | 8 |
| 7 | 10 |
| 5.8 | 13 |
| SRC-75SA | Air cooling | 10.5 | 7 | 55 | 2980 | 380V50Hz | 268 | 2″ | 1250 | 1900*1240*1700 |
| 9.8 | 8 |
| 8.7 | 10 |
| 7.5 | 13 |
| SRC-90SA | Air cooling | 11.7 | 7 | 65 | 2980 | 380V50Hz | 268 | 2″ | 1530 | 1900*1240*1700 |
| 11.3 | 8 |
| 9.5 | 10 |
| 8.4 | 13
|
| Air intake status | ≤Ambient temperature intake pressure 1.013bar(A) | Voltage(V)
Frequency(Hz) | 380V50Hz |
| Start-ups | Y-△ | Noise dB(A) | 72±5dB |
| Oil Content | 1~3ppm | Outlet Air Temperature | ambient temperature+8℃ |
⊙ Type air compressor pause
⊙ Features:
Energy Efficient
Unique N power rotors for maximum air flow and minimum power consumption.
Efficient Coupling
Air end and motor shafts are coupled through a permanently aligned cushion type flexible coupling. ELGI's efficient coupling ensures efficient power transmission and constant FAD throughout the life.
Efficient Oil Separation through OSBIC
ELGI has perfected the "OSBIC" (Oil Separation by Impact and centrifugal action) process which enables efficient separation of air and oil with minimum pressure drop. The process results in low oil carry-over(< 2 ppm) level at the output of the compressor.
