18.5 KW Energy Efficient Air Compressor 2.05~3.13 m³/min 380V High Energy Efficient
⊙ Why the oil free water spray screw technology is needed?
➤ Large capacity
➤ High exhaust pressure (single stage compression pressure up to 17 bar)
➤ High efficiency
➤ Close to isothermal compression
➤ Low noise
➤ Real oil-free stainless-steel screw rotor
➤ Self-lubricating
➤ Oil free ISO85730 level certificate
➤ Lower application costs
➤ Lower maintenance costs
➤ “0” pollution to environment clean and safe compressed air
➤ no fault, long and stable running ability
⊙ Energy Efficient Air Compressordetailed parameters
| Model | Maximum
working pressure | FAD | Motor power | Noise | Pipe diameters of cooling water in and out | Quantity of cooling water | Quantity of lubricating water | Dimension | Weight | Air outlet |
| Inlet water 32℃ | L×W×H |
| Mpa | M³/min | KW | DB | T/H | L | mm | KG |
| SRC-6A/W | 0.8 | 0.78 | 5.5 | 57 | 3/4″ | 1.5 | 10 | 800×800×1100 | 430 | 3/4″ |
| 1.0 | 0.65 |
| SRC-8A/W | 0.8 | 1.17 | 7.5 | 57 | 3/4″ | 2 | 10 | 800×800×1100 | 470 | 3/4″ |
| 1.0 | 1.05 |
| 1.25 | 0.81 |
| SRC-11A/W | 0.8 | 1.72 | 11 | 60 | 1″ | 2.5 | 26 | 1200×800×1300 | 580 | 3/4″ |
| 1.0 | 1.42 |
| 1.25 | 1.10 |
| SRC-15A/W | 0.8 | 2.43 | 15 | 60 | 1″ | 3.5 | 26 | 1200×800×1300 | 620 | 1″ |
| 1.0 | 2.17 |
| 1.25 | 1.80 |
| SRC-18A/W | 0.8 | 3.13 | 18.5 | 63 | 1″ | 4 | 30 | 1400×1000×1520 | 680 | 1″ |
| 1.0 | 2.82 |
| 1.25 | 2.05 |
| SRC-22A/W | 0.8 | 3.7 | 22 | 63 | 1″ | 5 | 30 | 1400×1000×1520 | 730 | 1″ |
| 1.0 | 3.21 |
| 1.25 | 2.78 |
| SRC-30A/W | 0.8 | 5.2 | 30 | 66 | 1 ½″ | 7 | 40 | 1500×1150×1500 | 1100 | 1 ½″ |
| 1.0 | 4.43 |
| 1.25 | 3.36 |
| SRC-37A/W | 0.8 | 6.50 | 37 | 66 | 1 ½″ | 9 | 40 | 1500×1150×1500 | 1150 | 1 ½″ |
| 1.0 | 5.33 |
| 1.25 | 4.77 |
| SRC-45W | 0.8 | 8.30 | 45 | 68 | 1 ½″ | 10 | 90 | 1800×1300×1750 | 1390 | 2″ |
| 1.0 | 6.30 |
| 1.25 | 5.56 |
| SRC-55W | 0.8 | 10.3 | 55 | 69 | 1 ½″ | 12 | 100 | 1800×1300×1750 | 1470 | 2″ |
| 1.0 | 8.55 |
| 1.25 | 7.67 |
| SRC-65W | 0.8 | 11 | 65 | 70 | 1½″ | 15 | 100 | 1800×1300×1750 | 1430 | 2″ |
| SRC-75W | 0.8 | 13.00 | 75 | 72 | 1½″ | 18 | 100 | 1800×1300×1750 | 1630 | 2″ |
| 1.0 | 11.50 |
| 1.25 | 9.70 |
| SRC-90W | 0.8 | 16.60 | 90 | 73 | 1½″ | 20 | 120 | 2200×1550×1800 | 2350 | 2½″ |
| 1.0 | 14.66 |
| 1.25 | 12.60 |
| SRC-110W | 0.8 | 20.20 | 110 | 77 | 2″ | 24 | 120 | 2200×1550×1800 | 2460 | 2½″ |
| 1.0 | 16.66 |
| 1.25 | 15.56 |
| SRC-132W | 0.8 | 22.52 | 110 | 77 | 2″ | 24 | 120 | 2200×1550×1800 | 2460 | 2½″ |
| 1.0 | 16.66 |
| 1.25 | 15.56 |
| SRC-160W | 0.8 | 28.11 | 160 | 79 | 3″ | 35 | 160 | 3000×1800×2100 | 3700 | 3″ |
| 1.0 | 25.45 |
| 1.25 | 22.52 |
| SRC-185W | 0.8 | 33.97 | 185 | 79 | 3″ | 38 | 160 | 3000×1800×2100 | 3750 | 3″ |
| 1.0 | 29.00 |
| 1.25 | 25.21 |
| SRC-200W | 0.8 | 36.75 | 200 | 80 | 4″ | 42 | 200 | 3100×1850×2100 | 3900 | 4″ |
| 1.0 | 32.78 |
| 1.25 | 29.24 |
| SRC-220W | 0.8 | 39.67 | 220 | 80 | 4″ | 47 | 200 | 3100×1850×2100 | 4200 | 4″ |
| 1.0 | 36.75 |
| 1.25 | 29.63 |
| SRC-250W | 0.8 | 45 | 250 | 80 | 4″ | 53 | 200 | 3100×1850×2100 | 4600 | 4″ |
| 1.0 | 39.67 |
| 1.25 | 33.97 |
Life of compressor air end
Rotors are asymmetric in profile and backed up by ball bearings and roller bearings and operate at a low speed. Helical gears can produce axial force to kill some acting force, which reduces the load of the bearing of compressor air end. Thereby low in abrasion and maintenance and repair expenses and the compressor air end being long in service life.
More reliable operation
With frequency conversion soft start reduce in-rush starting current, reduce wear on electrical switch gears and motor windings. Also maintain less power during starting and stopping of motors and increase protection to motors. Also reduce peak demand and improve power factor.
Efficiency and energy conservation
Thanks to the variable-speed control technology, the capacity of compressors can be perfectly combined with the air use of users, which downright avoid the unloading power loss. In intermittent air use, the minimized load of soft start eliminates the starting frequency of the peak current and further smooth start can reduce the power supply, equipment costs as well as the impact on the network power.
In the case of rated power license setting desired pressure at discretion, and maintaining constant pressure at discretion, and maintaining constant pressure
User to choose any delivery pressure between 4-13bar without any gears or belt change. When the use of air increases the unit increases air output through automatic acceleration of rotational speed to avoid a falling pressure and ensure volume at constant pressure. When the use of air decreases, the unit reduces air output by automatically lowering the rotational speed to avoid pressure increase and ensure continued air supply constant pressure.
